A clogged strainer, typically caused by a contaminated tank, can dramatically reduce fuel flow, leading to a driveability issue. Too often, the technician assumes the problem is the fuel pump rather than the strainer and fails to correct the contamination problem.

This inevitably leads to a repeat clogging issue and an unhappy customer!

The best way to prevent fuel delivery comebacks is to always make sure there are no contaminants in the fuel supply. Using a CleanScreen™ strainer provides an added degree of protection against clogging. The CleanScreen layered filtration design provides up to 40% more dirt-holding capacity than other common strainer materials. So it maintains fuel flow even while catching more contaminants. This helps keep the consumer on the road even in cases where other strainers may clog and cause a lack of flow to the fuel pump.

Ultrasonically bonded non-woven layers offer nearly twice the capacity of other strainer materials.

CleanScreen strainer incorporates multiple layers of filter media and improved surface area to progressively trap smaller debris and finer particles. This design increases fuel pump life in dirty fuel environments and is less prone to clogging - offering improved performance.

The revolutionary CleanScreen strainer is available exclusively in select
Carter fuel pumps, modules and assemblies.